China Best Sales CZPT Lorry Truck Stake Flatbed Fence Truck Diesel Cargo for Sell plastic gear rack

Product Description

Topsale products
sewage suction truck
fuel tank truck
garbage truck

Product Description

1T, 1.5T,2Tdiesel engine cheap mini trucks rhd mini light truck 
Advantages Introduction:
1.Single row cab with air conditioning, USD + AUX, electric windows and with a quick drop function, adjustable electric mirrors
2.Power, Shuailing X equipped with the JAC Navistar production HFC4DA1-1C engine, maximum power of 92 hp (68KW), maximum torque220N.m, maximum torque range is 1800-2200rpm, the lowest fuel consumption at full load is 210g / KW.h. Using variable geometry turbo technology, so that the engine has a higher low-speed torque and a wider maximum torque speed range. Electronically controlled VE pump + double DOC system to achieve national IV emission standards.
3.Matched with the 4DA1 engine is LC5T80 five-speed gearbox, and Chien 2-ton rear axle, ratio 3.615, smaller rear axle gear ratio makes the vehicle a higher speed to meet urban logistics of timeliness requirements.
4.Chassis, the front suspension is double wishbone independent suspension, power steering tie with rack and pinion steering system, making the vehicle had a good ride comfort. Qianpanhougu braking system in the form of, more reliable braking.
5.Frame rectangular beam, higher strength while reducing weight, can reduce vehicle fuel consumption. Plastic fuel tank capacity of 65 liters, light weight, hanging on the body girder. Cab configuration ramjet bumper beams, side panels, A-pillar reinforcement steel structure, security.

Product Parameters

Products Technical Specification
   4*2 MINI Truck
Chassis Model HFC1036PV4K1B5
Emission Standards Euro 4
Fuel type Diesel
Cabin Single row,A/C
Whole vehicle 
main dimensions (mm)
Overall dimensions (L×W×H) 5265*1750*2035
Cargo body dimensions  3110*1650*355
Wheel base        2640
Front overhang        1185
Rear overhang     1340
Min. ground clearance  128
Weight data (kg) G.V.W 3571
Curb weight (chassis) 1770
Max payload 1000 – 2000
Whole vehicle 
main performance
Max. speed (km/h) 90
Max. slope of climb (%) 30
Engine Model HFC4DA1-1C
Maximum power 68kw / 92hp
Number of cylinders 4
Displacement (L) 2.771
Engine Manufacturer ZheJiang Xihu (West Lake) Dis.i Navistar Diesel Engine Co., Ltd.
Gear box Number of gears 5 CZPT gears & 1 reverse
Axle  Front Load capacity (ton) 1
Rear Load capacity (ton) 2
Suspension Front/Rear-Leaf spring Independent front suspension / 3 + 2
Steering Wheel left/right hand drive LHD
Brake system Service brake  Oil braking
Electric device Rated voltage 24V
Front wheel tire / rear tire  195/70R15C-8PR / 155R13C-8PR
Oil tank capacity 65L


We have more type of special truck 
eg:rhd water tank truck,rhd oil tank truck,rhd flatbed truck,rhd dump truck,rhd refeeze van truck,etc.

A.Product Series
1.  Fuel tank truck/trailer/semi-trailer/container.
2.  Water tank truck/trailer/semi-trailer/container.
3.  Chemical tank truck/trailer/semi-trailer/container.
4.  BiHangZhou tank truck/trailer/semi-trailer/container.
5.  Bulk powder tank truck/trailer/semi-trailer/container.
6.  Gas tank truck/trailer/semi-trailer/container.
7.  Dump truck/trailer/semi-trailer
8.  Truck mounted crane
9.  Fecal suction truck.
10. Sewage suction vacuum tank truck.
11. High pressure washing truck.
12. Sewage suction vacuum tank and high pressure washing truck.
13. (vacuum)Sweeper truck.
14. Garbage truck(swing arm type,sealed dump type,compression type,hanging barrel type,docking type)
15. Concrete mixer truck
16. Fire truck
17. Wrecker
18. Refrigerator truck/trailer/semi-trailer
19. Platform transported truck/trailer/semi-trailer
20. Van truck/trailer/semi-trailer
21. High-altitude operation truck

Company Profile

B,Packaging & Shipping:
Truck is nude packing, shipping by container, bulk cargo, ro-ro.
We will choose the best shipping type basis on truck volume, truck structure, CZPT Schedule, clients’ requirement for clients!

C:Customer service:
We supply sincerity, efficient, professional, happiness service on pre-sale, in the sale, after-sale
Any requiry will be replied within 24 hours.
High quality ,competitive&reasonable price, fast lead time.
Our products are direct from factory,there is no middle man,no high markup,so we can provide quality items yet very competitive price.
We guarantee that all our goods has gone through strict quality control and testing to ensure that it is in good condition before ship out.We strive for 100% customer satisfaction on every sale we complete.
Fast delivery time: within about 10~~20 working days.
We provide 12 months warranty.
We supply quick-wear parts and  spare parts in time for customer.


After-sales Service: Lifetime Technical Support
Warranty: 3 Years
Type: Flatbed Style


Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.

about shipping cost and estimated delivery time.
Payment Method:


Initial Payment

Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.


Types of Bevel Gears

Bevel Gears are used in a number of industries. They are used in wheeled excavators, dredges, conveyor belts, mill actuators, and rail transmissions. A bevel gear’s spiral or angled bevel can make it suitable for confined spaces. It is also used in robotics and vertical supports of rolling mills. You can use bevel gears in food processing processes. For more information on bevel gears, read on.

Spiral bevel gear

Spiral bevel gears are used to transmit power between two shafts in a 90-degree orientation. They have curved or oblique teeth and can be fabricated from various metals. Bestagear is one manufacturer specializing in medium to large spiral bevel gears. They are used in the mining, metallurgical, marine, and oil fields. Spiral bevel gears are usually made from steel, aluminum, or phenolic materials.
Spiral bevel gears have many advantages. Their mesh teeth create a less abrupt force transfer. They are incredibly durable and are designed to last a long time. They are also less expensive than other right-angle gears. They also tend to last longer, because they are manufactured in pairs. The spiral bevel gear also reduces noise and vibration from its counterparts. Therefore, if you are in need of a new gear set, spiral bevel gears are the right choice.
The contact between spiral bevel gear teeth occurs along the surface of the gear tooth. The contact follows the Hertz theory of elastic contact. This principle holds for small significant dimensions of the contact area and small relative radii of curvature of the surfaces. In this case, strains and friction are negligible. A spiral bevel gear is a common example of an inverted helical gear. This gear is commonly used in mining equipment.
Spiral bevel gears also have a backlash-absorbing feature. This feature helps secure the thickness of the oil film on the gear surface. The shaft axis, mounting distance, and angle errors all affect the tooth contact on a spiral bevel gear. Adjusting backlash helps to correct these problems. The tolerances shown above are common for bevel gears. In some cases, manufacturers make slight design changes late in the production process, which minimizes the risk to OEMs.

Straight bevel gear

Straight bevel gears are among the easiest types of gears to manufacture. The earliest method used to manufacture straight bevel gears was to use a planer equipped with an indexing head. However, improvements have been made in manufacturing methods after the introduction of the Revacycle system and the Coniflex. The latest technology allows for even more precise manufacturing. Both of these manufacturing methods are used by CZPT. Here are some examples of straight bevel gear manufacturing.
A straight bevel gear is manufactured using two kinds of bevel surfaces, namely, the Gleason method and the Klingelnberg method. Among the two, the Gleason method is the most common. Unlike other types of gear, the CZPT method is not a universal standard. The Gleason system has higher quality gears, since its adoption of tooth crowning is the most effective way to make gears that tolerate even small assembly errors. It also eliminates the stress concentration in the bevelled edges of the teeth.
The gear’s composition depends on the application. When durability is required, a gear is made of cast iron. The pinion is usually three times harder than the gear, which helps balance wear. Other materials, such as carbon steel, are cheaper, but are less resistant to corrosion. Inertia is another critical factor to consider, since heavier gears are more difficult to reverse and stop. Precision requirements may include the gear pitch and diameter, as well as the pressure angle.
Involute geometry of a straight bevel gear is often computed by varying the surface’s normal to the surface. Involute geometry is computed by incorporating the surface coordinates and the theoretical tooth thickness. Using the CMM, the spherical involute surface can be used to determine tooth contact patterns. This method is useful when a roll tester tooling is unavailable, because it can predict the teeth’ contact pattern.

Hypoid bevel gear

Hypoid bevel gears are an efficient and versatile speed reduction solution. Their compact size, high efficiency, low noise and heat generation, and long life make them a popular choice in the power transmission and motion control industries. The following are some of the benefits of hypoid gearing and why you should use it. Listed below are some of the key misperceptions and false assumptions of this gear type. These assumptions may seem counterintuitive at first, but will help you understand what this gear is all about.
The basic concept of hypoid gears is that they use two non-intersecting shafts. The smaller gear shaft is offset from the larger gear shaft, allowing them to mesh without interference and support each other securely. The resulting torque transfer is improved when compared to conventional gear sets. A hypoid bevel gear is used to drive the rear axle of an automobile. It increases the flexibility of machine design and allows the axes to be freely adjusted.
In the first case, the mesh of the two bodies is obtained by fitting the hyperboloidal cutter to the desired gear. Its geometric properties, orientation, and position determine the desired gear. The latter is used if the desired gear is noise-free or is required to reduce vibrations. A hyperboloidal cutter, on the other hand, meshes with two toothed bodies. It is the most efficient option for modeling hypoid gears with noise concerns.
The main difference between hypoid and spiral bevel gears is that the hypoid bevel gear has a larger diameter than its counterparts. They are usually found in 1:1 and 2:1 applications, but some manufacturers also provide higher ratios. A hypoid gearbox can achieve speeds of three thousand rpm. This makes it the preferred choice in a variety of applications. So, if you’re looking for a gearbox with a high efficiency, this is the gear for you.

Addendum and dedendum angles

The addendum and dedendum angles of a bevel gear are used to describe the shape and depth of the teeth of the gear. Each tooth of the gear has a slightly tapered surface that changes in depth. These angles are defined by their addendum and dedendum distances. Addendum angle is the distance between the top land and the bottom surface of the teeth, while dedendum angle is the distance between the pitch surface and the bottom surface of the teeth.
The pitch angle is the angle formed by the apex point of the gear’s pitch cone with the pitch line of the gear shaft. The dedendum angle, on the other hand, is the depth of the tooth space below the pitch line. Both angles are used to measure the shape of a bevel gear. The addendum and dedendum angles are important for gear design.
The dedendum and addendum angles of a bevel gear are determined by the base contact ratio (Mc) of the two gears. The involute curve is not allowed to extend within the base diameter of the bevel gear. The base diameter is also a critical measurement for the design of a gear. It is possible to reduce the involute curve to match the involute curve, but it must be tangential to the involute curve.
The most common application of a bevel gear is the automotive differential. They are used in many types of vehicles, including cars, trucks, and even construction equipment. They are also used in the marine industry and aviation. Aside from these two common uses, there are many other uses for bevel gears. And they are still growing in popularity. But they’re a valuable part of automotive and industrial gearing systems.

Applications of bevel gears

Bevel gears are used in a variety of applications. They are made of various materials depending on their weight, load, and application. For high-load applications, ferrous metals such as grey cast iron are used. These materials have excellent wear resistance and are inexpensive. For lower-weight applications, steel or non-metals such as plastics are used. Some bevel gear materials are considered noiseless. Here are some of their most common uses.
Straight bevel gears are the easiest to manufacture. The earliest method of manufacturing them was with a planer with an indexing head. Modern manufacturing methods introduced the Revacycle and Coniflex systems. For industrial gear manufacturing, the CZPT uses the Revacycle system. However, there are many types of bevel gears. This guide will help you choose the right material for your next project. These materials can withstand high rotational speeds and are very strong.
Bevel gears are most common in automotive and industrial machinery. They connect the driveshaft to the wheels. Some even have a 45-degree bevel. These gears can be placed on a bevel surface and be tested for their transmission capabilities. They are also used in testing applications to ensure proper motion transmission. They can reduce the speed of straight shafts. Bevel gears can be used in many industries, from marine to aviation.
The simplest type of bevel gear is the miter gear, which has a 1:1 ratio. It is used to change the axis of rotation. The shafts of angular miter bevel gears can intersect at any angle, from 45 degrees to 120 degrees. The teeth on the bevel gear can be straight, spiral, or Zerol. And as with the rack and pinion gears, there are different types of bevel gears.

China Best Sales CZPT Lorry Truck Stake Flatbed Fence Truck Diesel Cargo for Sell   plastic gear rackChina Best Sales CZPT Lorry Truck Stake Flatbed Fence Truck Diesel Cargo for Sell   plastic gear rack
editor by CX 2023-11-13